Heat staking welding machine, it is the role of the heat staking welding head heated over, using the motor down pressure to let the welding unit with the maximum pressure to make the product welding column (tendons) to form a certain shape, while using the pre-pressure unit to press the upper and lower products, so that the two products weld together, while using the blow up cooling, so that the product riveted to form a saturated state to achieve a certain pressure.
Loading and unloading station
Operator manual activities.
- load individual parts.
- Push the start button.
- Observe the HMI on the right side of the operator’s table.
- After welding is complete, unload the entire welded part.
the danger zone: that is, the heat staking welding machine work area, operation, equipment running the following work steps: the driving operation in the heat staking welding machine.
Safety devices are part of the normal heat staking equipment condition they are used to protect human life and health safety, if make the safety device failure, then cannot prevent from acting carelessly and having fault.
The Heat Staking Machine is equipped with the following safety circuits.
1. Maintenance door Safety switch
2. Emergency stop button at the operator’s position, distributed on the right side of the operator’s desk and the man-machine interface operation panel.
3. Safety curtain at operator’s position
4. safety door from the operator side
heat staking welding machine movement flow:
- Load parts
- Press start button
- Servo motor down
- Heat staking welding unit welding, welding completed servo motor up
- Unloading, and repeat the above operation
